TILE BOND™
Dow TILE BOND™ 23 lb Canister Kit - DOW-157849 - Call for Pricing
Dow TILE BOND™ 23 lb TANK ONLY - DOW-157957 - Call for Pricing
Dow TILE BOND™ 20 oz can - DOW-157956 - Call for Pricing
Setting a New Standard for Roof Tile Installation
TILE BOND™ roof tile adhesive is a single-component polyurethane adhesive for attachment of concrete and clay roof tiles.
Because it is easy to work with and reduces tile breakage and materials, TILE BOND cuts installation time and labor costs compared to old traditional methods.
Furthermore, TILE BOND provides greater attachment strength, minimizes nail penetrations, and reduces roof weight loads.
Superior dispensing equipment supplies the adhesives in a highly consistent manner and eliminates the need for expensive heavy equipment.
TILE BOND adhesive is used to install most low/flat, medium, high and two-piece barrel (cap and pan) profiles of roof tile in new and re-roof applications.
TILE BOND is Miami-Dade Approved Acceptance: # 01-1011.01, SBCCI Listed Evaluation Report #2201,
meets South Florida Building Code-Broward County 1999 Edition,
Florida Building Code/International Code Council (ICC) Report Number: Application #FL717,
UL Class 1 listed (ASTM E 84), Class A Rated (ASTM E 108), and the Wisconsin Department of Commerce Approval # 970107-0.
TILE BOND must be applied to an underlayment installed in compliance with application instructions detailed in the following documents:
- FRSA/Roof Tile Institute Adhesive Set Tile Specification "System #4"
- Chapter 15 of the Standard Building Code
- Chapter 34 of the South Florida Building Code-Broward Edition
- Metro-Dade County RAS 140
TILE BOND meets or exceeds the minimum design wind pressure criteria of the Texas Department of Insurance when installed with Product Evaluation Report RC-28.
- Fast
- Hassle-free
- Lightweight
- Convenient
- Hurricane-proven: Approval for 140 mph wind uplift resistance
- Metro-Dade approved
TILE BOND™ cuts installation time and labor costs compared to traditional methods.
Furthermore, TILE BOND provides greater attachment strength, minimizes nail penetrations, and reduces roof weight loads.
Superior dispensing equipment supplies the adhesives in a highly consistent manner and eliminates the need for expensive heavy equipment.
| Advantages of TILE BOND adhesive vs. | Screws | Mortar | Two-component
Foam | Wire Ties |
| Reduces labor costs | x | x | x | x |
| Portable, easy to handle | | x | x | x |
| No investment in heavy equipment | | x | x | |
| No equipment malfunction downtime | | | x | |
| No equipment clean-up/maintenance | | x | x | |
| Superior attachment strength compared with traditional methods | x | x | | x |
| No capital investment in dispensing equipment | | | x | |
| Reduces tile breakage/material costs | x | | | x |
| Minimizes roof deck penetrations | x | | | x |
| May eliminate nailing on roofs with pitches up to 6:12 | x | | | |
| Easier to use than other methods | x | x | x | x |
| Dispenses consistent quality adhesive | | | x | |
| Lightweight material reduces roof load | | x | | |
| No external power source required | | | x | |
| Not affected by changes in temperature | | x | x | |
| Product | Size | Part Number | Contents | Code Approvals |
| TILE BOND | 23 lb canister | 157849 |
- One canister of adhesive
- One hose
- One wand
- One coupler
- One valve
- One wrench
- Instructions
|
Metro-Dade
Notice of Acceptance
No.: 01-1011.01
Expires 08/23/2006
SBCCI
PST&ESI
Evaluation Report #2201
South Florida
Building Code
Broward County
1999 Edition
UL Classified
Class 1 Listed
(ASTM E 84)
|
TILE BOND
Tank Only | 23 lb canister | 157957 |
- One canister of adhesive
- Instructions
|
| TILE BOND | 20 oz can | 157956 |
- One canister of adhesive
- One dispensing straw
|
|
Product Info
